Ready Mix Concrete Fiber Additives
Maschmeyer offers a complete selection of ready mix concrete fiber additives designed to improve durability, control cracking and enhance long-term performance. Browse our available fiber products below to find the right reinforcement for your next residential, commercial or industrial project.
Concrete Fiber Products
FRC MONO-150 MICRO SYNTHETIC FIBER
FRC MONO-150 fibers are manufactured from 100% virgin polypropylene resin and exceed the requirements of ASTM C-1116 “Standard Specification for Fiber-Reinforced Concrete and Shotcrete.”
They are specifically engineered for use in concrete as secondary reinforcement and for controlling plastic shrinkage and settlement cracking. MONO-150 fibers are designed for early crack control, but they also do an excellent job of increasing the impact, shatter and abrasion resistance of the concrete.
FRC HBS-650 MACRO-SYNTHETIC FIBER
FRC HPS-650 is a macro-synthetic fiber engineered with e3 patented technology for optimal gradation and orientation. Made with 100% virgin olefin materials by Sika in an ISO 9001 certified facility, it ensures superior inter-facial bonding and flexural toughness in concrete.
Privately labeled for FRC Resources, it meets the same standards as Fibermesh 650 and SikaFiber Force 650, offering strength and compliance in concrete reinforcement.
FRC 950 BLEND MACRO-SYNTHETIC FIBER
FRC 950 Blend is a state-of-the-art concrete reinforcement system featuring polyolefin macro-monofilament fibers with patented sinusoidal deformations and 100% virgin homopolymer micro synthetic graded fibers. Manufactured by Sika, it meets stringent standards in an ISO 9001 certified facility.
Privately labeled for FRC Resources, it aligns with Novomesh 950 and SikaFiber Force 950, ensuring top-tier strength and compliance in concrete reinforcement.
FRC CSD-2500 FIBERS
FRC CSD-2500 fibers are made of low carbon drawn wire and have a minimum tensile strength of over 140 ksi. This product was engineered for use in composite steel decks to meet the requirements of the Steel Deck Institute (SDI).
CSD-2500 is packaged in 25-lb. degradable bags that are easy to store, load and mix.
FRC 6560-HE STEEL FIBER
FRC 6560-HE steel fibers are tailored for concrete reinforcement. These cold-drawn, collated, hooked-end (HE) steel fibers ensure optimal anchorage within the concrete.
Engineered to surpass performance requirements, they are privately labeled for FRC Resources and formerly known as SikaFiber Novocon HE-6560. Meeting identical codes and standards, FRC 6560-HE guarantees exceptional strength and compliance in concrete reinforcement.
FORTA-FERRO®
FORTA-FERRO® is an easy-to-finish, color-blended macrosynthetic fiber made of 100% virgin copolymer/polypropylene consisting of a twisted bundle of non-fibrillating monofilament and a fibrillating network fiber, yielding a high-performance concrete reinforcement system. FORTA-FERRO® is used to reduce plastic and hardened concrete shrinkage, improve impact strength and increase fatigue resistance and concrete toughness.
This extra heavy-duty macrosynthetic fiber offers maximum long-term durability, structural enhancements and effective secondary/temperature crack control by incorporating a truly unique synergistic fiber system of long length design. FORTA-FERRO® is non-corrosive, non-magnetic, and 100% alkali proof.
FRC FIB-300 MICRO SYNTHETIC FIBER
FRC FIB-300 fibers are manufactured from 100% virgin polypropylene resin and exceed the requirements of ASTM C-1116 “Standard Specification for Fiber-Reinforced Concrete and Shotcrete.”
They are fibrillated fibers that are specifically engineered for use in concrete as secondary reinforcement and for controlling plastic shrinkage and settlement cracking. FIB-300 is a multi-length fiber that is designed for early age crack-control, but also can be used as secondary reinforcement.
FRC 850 BLEND SYNTHETIC & STEEL FIBER
FRC-850 BLEND is a blend of low carbon drawn wire fibers and polypropylene synthetic microfibers. The combination of the two proven fiber types provides a reinforcement system that addresses plastic shrinkage, as well as restrained shrinkage, in concrete slabs.
Blending both fiber types into one pre-measured degradable bag offers owners, engineers and contractors an easy way to provide a highly effective alternative to welded wire mesh and rebar.
FRC CS-1000 STEEL FIBER
FRC CS-1000 fibers are made of low carbon, cut sheet steel with a tensile strength from 50 to 100 ksi. They contain deformations that run down the fibers that give them an incredible mechanical bond to the concrete matrix.
These are the best crack-containment fibers on the market. They are 1” in length with a very small diameter, which helps ensure that an individual fiber will cross a forming crack and hold that crack tightly.
FRC 4550-HE STEEL FIBERS
FRC 4550-HE steel fibers (formerly Novocon 1050) are specifically engineered for concrete reinforcement. These cold-drawn, hooked-end (HE) steel fibers ensure optimal anchorage within the concrete matrix.
Privately labeled for FRC Resources, FRC 4550-HE meets the same rigorous codes and standards as SikaFiber Novocon-HE, guaranteeing superior strength and compliance in concrete reinforcement.
FRC NOVOCON XR STEEL FIBER
FRC Novocon XR steel fibers are engineered to fortify concrete and shotcrete mixes. These cold-drawn, undulated steel fibers provide unparalleled anchorage within the concrete matrix.
Designed to surpass performance requirements, they are privately labeled for FRC Resources and align with SikaFiber Novocon XR, meeting identical codes and standards. FRC Novocon XR guarantees exceptional strength and compliance in concrete reinforcement.